Hotmelt Tank/Melters

Hotmelt Tank/Melters

B4 Series

Technical Characteristics B4-P (piston) B4-E (gear)
Tank capacity 4 liters 4 liters
Maximum pumping rate (Depending on adhesive type) 29.3 kg/h pump 7 cc 6 kg/h pump 2 cc/rev (50 rpm)
Maximum melting rate (Depending on adhesive type) 6 kg/h 6 kg/h
Number of outputs 2 2
Temperature range 40 to 200 ºC 40 to 200 ºC
Temperature control RTD ±0.5 ºC (±1 ºF) RTD ±0.5 ºC (±1 ºF)
Maximum working pressure 81.6 bar (1183 psi) 40 bar
Maximum installation power (at 230 VAC) 3,680 W (16A) 3,680 W (16A)
Electrical requirements LN ~ 230V 50/60 Hz + PE LN ~ 230V 50Hz + PE
External functions Temperature ok output Temperature ok output
External standby activation External standby activation
On/Off Motor pump Dimensions (LxAxH) 600x320x354 mm 600x320x354 mm
Weight 36 kg 38 kg
OPTIONS
Temperature range 40 to 230 °C 40 to 230 °C
Low level sensor Capacitive (with warning light) Capacitive (with warning light)
Granulate feeder Yes Yes
Automatic pressure control (VP200) Yes No
External connector pump activation No Yes

Micron +

Technical Characteristics Micron +
Melting rate* from 9.0 to 30 kg/h.
Pumping capacity* 29.3 kg/h for 7 cc pump (*); 66 kg/h for 19 cc (*) pump.
No. of outlets 2,4 or 6 electrical outlets – 6 hydraulic outlets.
Range of temperatures 0 to 200°C (32 to 392° F).
Temperature control Pt100, Ni120 or NTC-R.
Maximum working pressure (up to 6 bars) 81.6 bar (1183 psi).
External features INPUTS: unit on/off, standby, activity control (input signal for
auto standby/off), pump on-off, coms on-off, inhibition of
electrical outlets.OUTPUTS: low adhesive level, pump on, standby, temperature OK,
temperatures at set points, error, level error (warning light), feeding fault.
Electrical requirements 1N ~ 230V 50/60Hz + PE or 3N ~ 400V 50/60Hz + PE.
Options -Range of temperatures from 0 to 230°C (32 to 446°F).
-VP-200 automatic pressure control.-Transformer base for 400 VAC without neutral (not
available in 35 version).-Air intake filter,-Low level detector (not available in 230°C) or capacitive
sensor with or without warning light.-Automatic adhesive feeder.

MICRON MOD

TECHNICAL FEATURES
Melting capacity”:  15.5 kg/h
Pumping capacity”): 29.3 kg/h, 7 cc pump
No. of outputs: 2, 4 or 6
Temperature range: 40 to 200°C [104 to 392°F)
Temperature control:  RTD + 0,5°C [+ 1°F]
Maximum working pressure [6 bar): 81.6 bar (1,183 psi)
Maximum installed power [ 230 VAC): 4,820 W (2 outputs), 7,220 W [4 outputs) and 9,620 W [6 outputs)
External functions: Temperature outputs OK,  Input under maintenance, External output inhibition control.
Electrical requirements: 1 ~ N/PE 400/230V 50/60 Hz  or 3 ~ N/PE 400/230V 50/60 Hz
Dimensions (L x H x W) and Weight: 587 x 377 x 577 y 47 kg
(w/o automatic adhesive charging system].
Options: Automatic pressure control VP-200, Tower light.
* According to the type of adhesive.

MICRON+ GEAR

MICRON + 5 MICRON + 10 MICRON + 20 MICRON + 35
MELTING RATE* 9 kg/h 13,5 kg/h 19 kg/h 30 kg/h
PUMPING RATE* SIMPLE PUMP: 1, 2.5, 4, 8 cc/rev / DOUBLE PUMP: 2×0.93, 2×1.86, 2×3.71, 2×4.8 cc/rev
NUMBER OF OUTPUTS 2,4 or 6 with one pump — 2 or 4 with two pumps
TEMPERATURE RANGE 0 to 200 °C (32 to 392 °F)
TEMPERATURE CONTROL Pt100, Ni120 or NTC-R
MAXIMUM WORKING PRESSURE (TO 6 BAR) 90 bar (1.305 psi)
MAXIMUM INSTALLATION POWER 1 simple pump/ 2 outputs 1 simple pump/ 2 outputs 1 simple pump/ 2 outputs 1 simple pump/ 2 outputs
1x 6,9KW/ 3 x 3,0KW 1 x 8,0KW/ 3 x 4,0KW 1 x 8, 5KW/ 3 x 4,5KW 1x 10,0KW/ 3 x 4,3KW
1 simple pump / 4 outputs 1 simple pump / 4 outputs 1 simple pump / 4 outputs 1 simple pump / 4 outputs
1x 10,5KW/ 3 x 4,0KW 1x 11,6KW/ 3 x 4,0KW 1x 12,1KW/ 3 x 4,5KW 1x 13,5KW/ 3 x 6,1KW
1 simple pump / 4 outputs 1 simple pump / 6 outputs 1 simple pump / 6 outputs 1 simple pump / 6 outputs
1x 14,2KW/ 3 x 5,8KW 1x 15,2KW/ 3 x 5,8KW 1x 15,6KW/ 3 x 5,8KW 1x 17,2KW/ 3 x 7,9KW
2 simple pumps / 2 outputs 2 simple pumps / 2 outputs 2 simple pumps / 2 outputs 2 simple pumps / 2 outputs
1 x 8,3KW/ 3 x 3,3KW 1x 9,3KW/ 3 x 4,0KW 1x 9,8KW/ 3 x 4,5KW 1x 11,3KW/ 3 x 5,3KW
2 simple pumps / 4 outputs 2 simple pumps / 4 outputs 2 simple pumps / 4 outputs 2 simple pumps / 4 outputs
1x 11,9KW/ 3 x 4,6KW 1x 12,9KW/ 3 x 4,4KW 1x 13,4KW/ 3 x 4,6KW 1x 14,9KW/ 3 x 7,1/KW
EXTERNAL FUNCTIONS INPUTS: Unit on-off / standby / activity control / pumping on-off / communications on-off / shooting inhibition (with pattern controller integrated / electrical outputs inhibition
OUTPUTS: Adhesive level (nc) / pumping on / standby on / temperature zones ok / alarms on / unit ready / adhesive level (no)
ELECTRICAL REQUERIMENTS 1N ~ 230V 50/60Hz + PE / 3N ~ 400V 50/60Hz + PE / 3 ~ 230V 50/60Hz + PE
WORKPLACE TEMPERATURE 0 to 40°C

PS20

TECHNICAL FEATURES PS20
Drum dimensions Ø280 (inner diameter) x 400mm (up to 20 litre)
Type of melting platen Smooth Axial platen
Melting rate (*) 9-10 kg/h 18-20 kg/h
Pumping capacity (*) 1, 2.5, 4 and 8 cc/rev single pump
2×0.93, 2×1.86, 2×3.71 and 2×4.8 cc/rev double pump
Number of pumps 1 single pump or 1 double pump
Number of hydraulic outputs 2 per pump (3/4’ UNF thread)
Number of electric outputs 2 or 4 outputs (Standard version)
Motor power 0.250 kW
Speed 10-80 rpm (range 0-100 rpm)
Temperature range 40 to 200ºC
Temperature control RTD ±0,5ºC
Maximum power pressure 80 bar (1.160 psi) (recommended not exceed 70 bar)
By- pass valve Pneumatic (manual regulation)
Maximum power supply
1 single pump/ 2 outputs 5.000 W/ per phase
1 single double/ 4 outputs 5.000 W/ per phase
External functions Temperature ok output, Empty drum output, Standby input, Motor start-stop external control, Motor speed external control
Electrical requirements 3N ~ 400V 50/60 Hz + PE
Options Tower light, Automatic air injection system for platen pulling out
(*) According to adhesive type, platen type and working conditions

PS200

 

TECHNICAL FEATURES PS200
Drum dimensions Ø571 (inner diameter) x 950mm (up to 200L)
Type of melting platen Smooth, axial platen or parallel platen
Melting rate (*) Up to 165 kg/h
Pumping capacity (*) 1, 2.5, 4, 8, 15, 20 and 30 cc/rev single pump
2×0.93, 2×1.86, 2×3.71 and 2×4.8 cc/rev double pump
Number of pumps 1 single pump or 1 double pump
2 single pumps up to 8 cc/rev
Number of hydraulic outputs 2 per pump (3/4’ UNF thread)
Number of electric outputs 2 or 4 outputs (Standard version)
Motor power 0.375, 0.55, 0.75, 1.1 kW depending on the type of pump
Speed 10-80 rpm (range 0-100 rpm)
Temperature range 40 to 200ºC
Temperature control RTD ±0,5ºC
Maximum power pressure 80 bar (1.160 psi) (recommended not exceed 70 bar)
By- pass valve Pneumatic (manual regulation)
Maximum power supply
1 single pump/ 2 outputs 9.300 W/ per phase
1 single double/ 4 outputs 10.500 W/ per phase
External functions Temperature ok output, Empty drum output, Standby input, Motor start-stop external control, Motor speed external control
Electrical requirements 3N ~ 400V 50/60 Hz + PE
Options Tower light, Automatic air injection system for platen pulling out
(*) According to adhesive type, platen type and working conditions
Scroll to Top